Rolex Oyster Perpetual 6580

From BezelBase


Oyster Perpetual -> 6580

Rolex Oyster Perpetual 6580, circa 1954, honeycomb dial with 3-6-9 numerals.

The 6580 is a steel Oyster Perpetual from the same mid-1950s flat-caseback generation as 6098, 6085 and 6564, carrying an off-white honeycomb dial with a 3-6-9 numeral layout under a smooth bezel. A documented example dates to circa 1954, cal 1030, 34mm steel case.

Core facts

detail value
reference 6580
family Oyster Perpetual
production circa 1954 (documented example)
case 34mm x 11mm, stainless steel
crystal Plexiglass (acrylic)
movement Caliber 1030, self-winding
dial Off-white honeycomb texture, 3-6-9 Arabic numerals
bezel Smooth

Where it sits in the line

The 6580 shares its cal 1030 movement and case architecture with 6098, 6085 and 6564, and specifically shares the honeycomb dial vocabulary with 6085 and 6098. Its own dealer description contrasts the smooth bezel here against a "shinier fluted cousin" elsewhere in the family — consistent with the same bezel-driven naming logic that organises the classic 4-digit 1002 / 1003 / 1005 generation a few years later.

Production outline

A documented example, case number 39801, dates to circa 1954. No Rolex-published production window exists; the reference sits inside the same mid-1950s window as its flat-caseback siblings.

Movement notes

Caliber 1030, the self-winding movement shared across this generation. No jewel count or beat rate was recovered from the located source.

Dial map

The signature configuration is an off-white honeycomb texture with printed 3-6-9 Arabic numerals, showing light aging around the indexes on the documented example, with radium lume plots described as largely intact aside from a few losses between 12 and 6 o'clock. No other dial variant has been independently confirmed for this reference.

Case, bezel, crystal, and crown

The case is stainless steel, 34mm across and 11mm thick, fitted with a Plexiglass crystal and a smooth steel bezel.

Related references

Shared references

Sources