BezelBase

Reference:6262


Daytona -> 6262

The 6262 is the brief 1970–1972 transitional Daytona that pairs the older pump-pusher case of the 6239 with the new high-frequency caliber 727. It carries the engraved metal tachymetric bezel of its 6239 ancestor, runs in parallel with its acrylic-bezel sibling 6264, and was overtaken within two years by the screw-pusher (screw-down chronograph pushers) 6263 / 6265 pair that closed the manual-wind era. Production was small and the reference is one of the rarer manual-wind Daytonas in the secondary market.

Error creating thumbnail: Unable to save thumbnail to destination
Rolex Cosmograph Daytona Ref. 6262 — pump-pusher metal-bezel transitional

Core facts

Field Value
Reference 6262
Family Daytona (Cosmograph, manual-wind)
Production 1970–1972
Movement caliber 727 (Valjoux 72 base), 21,600 vph
Case 36mm steel, 19mm lug width, pump pushers
Crystal acrylic
Bezel engraved steel tachymetric scale (vs acrylic insert on sibling 6264)
Crown Twinlock screw-down
Water resistance 50m / 165ft
Dial “Cosmograph” — standard panda / reverse panda; Paul Newman exotic
Bracelet 7205 rivet (early), 7835 folded (transitional), end-link 271
Sibling 6264 (acrylic bezel, pump pushers, same caliber 727)
Predecessor 6239 (caliber 722, metal bezel, pump pushers)
Successor 6263 / 6265 (screw-down pushers, longest manual-wind run)

Where it sits in the line

The four manual-wind Daytona references in production around 1970–1972 sort cleanly along two axes: pusher type and bezel material. The 6262 carries pump pushers and the engraved metal bezel, the same case configuration as the 6239 it succeeded. The 6264 carries pump pushers and an acrylic bezel insert, the same case configuration as the 6241. The 6263 and 6265, both introduced in 1970–1971 and running through 1988, return to the screw-down pushers first seen on the 6240 in 1965 and split bezel material the same way the 6262 / 6264 pair does. The 6262 is the metal-bezel half of a pump-pusher transitional pair, and the 6263 is its screw-pusher long-run counterpart.

What changed across the four-way 1970 generation was the movement, not the case. Caliber 727 raised the beat rate from 18,000 to 21,600 vph across all four references; the case decisions were inherited from the prior pair. Within two years the screw-pusher 6263 / 6265 had won out commercially, and the pump-pusher 6262 / 6264 pair was discontinued. The pump-pusher Cosmograph chronology that started with the 6239 in 1963 ends here.

Production outline

Production ran from 1970 through 1972, in parallel with the 6264 and overlapping the early 6263 and 6265 years. Total production is not pinned in any accepted Rolex source. Published date bands disagree at the edges, but the practical collector view is simple: the 6262 is a short-run bridge reference from the last pump-pusher phase of the manual-wind Daytona line.

The reference sits in the pre-letter-serial era. Cases carry the older numeric-only serial format used by Rolex through 1986. Single-mark production is the norm: there is no documented Mk1 / Mk2 split for the 6262, and the dial / bezel / pusher configuration stayed stable across the run. The visible variation across surviving examples is dial-aging (tropical browning) and the optional Paul Newman exotic dial, neither of which is a production-mark progression.

Movement notes

 
Cal 727 Valjoux 72 base in the 6262

The 6262 carries Rolex caliber 727 throughout. The 727 is the higher-frequency revision of the Valjoux 72 base: 21,600 vph (3 Hz) versus the 18,000 vph cal 722 used in the earlier 6239 and the cal 722-1 used in the late 6239 / 6241. Architecture is otherwise unchanged. Lateral-clutch chronograph coupling, column wheel, tri-compax sub-dial layout, 17 jewels, 48-hour reserve, manual wind. No quickset, no hack. The frequency jump from 18,000 to 21,600 vph at the 722 → 727 transition is the single most consequential Rolex change to the Valjoux 72 architecture across the whole manual-wind chapter, and the 6262 / 6264 pair is the first generation to wear it.

The same caliber 727 continued in the 6263 and 6265 through 1988, when the cal 4030 (Zenith El Primero base) took over the chronograph line in the 16520. See Reference:Movements#cal-727. US-bound 6262 examples carry an engraved “ROW” import code on the balance bridge, the same import marking documented across the period. Forensic dating of cal 727 examples can use the caliber-stamping style on the bridge: Jose Pereztroika’s Perezcope Unicorn 6265 work notes that an older “7-2-7” stamp appears on examples that should carry the newer “727” stamp, a useful tell when assessing dial / movement period match.

Dial map

Serial / year / dial / lume / bracelet

Serial range Year Dial Lume Bracelet End links Notes
2.4M-2.6M (~1970) 1970 Cosmograph, Paul Newman exotic tritium 7205 (early), 7835 (transitional) 271 Introduction year. Bracelet transition era — early 1970 examples likely on 7205; later 1970 may have shifted to 7835.
2.6M-3.0M (~1971) 1971 Cosmograph, Paul Newman exotic tritium 7835 271 Mid-production. 7835 folded bracelet established as standard fitment per chrono-shop matrix.
3.0M-3.3M (~1972) 1972 Cosmograph, Paul Newman exotic, Sigma (transitional, late 1972) tritium 7835 271 Final year. Sigma dials begin appearing on Daytona refs from ~1972 per Wind Vintage and Bulang — late 6262 examples could carry the early Sigma marker. Reference superseded by 6263/6265.

The 6262 dial group is small. Standard production wore the “Rolex Cosmograph” three-line dial: the older two-line text block of the pre-Oyster 6239 era, without the “Oyster” line that the screw-pusher Oyster 6240 / 6263 / 6265 references carry. The “Daytona” wording appears above the 6 o’clock sub-dial register, the position it had migrated to by 1967 across the manual-wind line. Both panda (black dial, white sub-dials) and reverse panda (white dial, black sub-dials) configurations appear on standard examples.

A smaller share carried Paul Newman exotic dials (named by collectors for the actor’s own 6239): square art-deco sub-dial numerals 15/30/45 in place of 20/40/60, square chronograph hashes, contrasting outer minute track painted in the colour of the sub-dials, and the Singer dial-maker stamp (named for the Stern Frères subsidiary Singer that produced them) on the back. The 6262 is one of six manual-wind references documented as a Paul Newman host, alongside the 6239, 6241, 6263, 6264, and 6265. The variant surfaces on the 6264 with enough regularity in the auction record to be a stable named configuration; documented 6262 Paul Newman examples are scarcer but follow the same dial typology.

The main 6262 dial split is simple: panda, reverse panda, and the much rarer Paul Newman branch. Late Sigma examples exist, and tropical ageing turns up on period black dials, but those are overlays on the main families rather than separate categories.

Case, bezel, crystal, and crown

The case is the 36mm steel Oyster of the period, 19mm between the lugs, with pump-style chronograph pushers, the older non-screw-down design first used on the 6239 and 6241. Water resistance is 50m, the same as the 6239 and a step below the 100m rating of the screw-pusher Oyster references (6240, 6263, 6265). The decision to keep pump pushers on the 6262 / 6264 pair while the screw-pusher line continued in parallel is the single editorial puzzle of the brief production window. The most defensible reading is that Rolex was still experimenting with water resistance and pusher style across the line before settling on the Oyster spec, and the timing fits: within two years the pump-pusher branch was gone.

The bezel is the engraved steel tachymetric scale that gives the 6262 its visual identity. The scale runs 60–400 units per hour, engraved into a steel bezel insert in the same style as the 6239 (and continuing on the metal-bezel screw-pusher 6265). The 6264 carries an acrylic bezel insert in the same configuration as the 6241 and 6263. The metal-versus-acrylic split runs through the entire manual-wind era: the 6239 and 6265 wear engraved metal, the 6240 and 6263 wear acrylic, and the 6262 / 6264 pair carries the choice forward in pump-pusher form.

Crystal is acrylic, period-standard. Crown is Twinlock screw-down with the period-correct Oyster signature, the same crown architecture as the contemporary Submariner and GMT-Master. A clean original engraved bezel on a 6262 is a meaningful condition item. The engraving is shallow and prone to wear from polishing, and replacement bezels surface periodically in the parts market. WatchTime’s 55-year history puts the 6264 on an acrylic bezel with screw-in pushers, which contradicts the canonical Hodinkee and Pucci Papaleo framing of the pair as pump-pusher transitionals. The metal-bezel pump-pusher 6262 / acrylic-bezel pump-pusher 6264 split is the working consensus across the rest of the published literature.

Bracelets, end links, and clasps

 
6262 on period-correct Oyster bracelet

The 6262 sits across the 7205-to-7835 bracelet transition. Early watches can be on 7205, later ones on 7835, both with end-link 271. The often-repeated “771” reading is just an OCR error for 271.

Clasps date the bracelet, not the watch head. Pre-1976 clasps carry quarterly numeric stamps inside the clasp blade in roman quarter / two-digit year format (“II.71” reads second quarter 1971). The 6262’s three-year run sits entirely in this pre-letter-code era. Both 7205 and 7835 use the small-logo folding clasp generation that ran from 1958 to roughly 1976. For the date-code key and the bracelet generation table, see Reference:Bracelets.

The US-market alternative bracelet was a Connecticut-made hollow-rivet 19mm with unmarked end-pieces, lighter gauge than the Swiss 7205 and sold by US Rolex agents from 1959 to 1979. These are not Rolex-stamped and are a known collector lead but not original-equipment.

Special branches

Paul Newman 6262

The Paul Newman dial appears on the 6262 too, but in much smaller numbers than on 6263 or 6265. The dial itself is not special to the 6262; what matters is whether the exotic dial and the short-run pump-pusher host case still make sense together.

Tropical 6262

Tropical 6262 dials — production-period black dials that have aged to brown or chocolate under UV exposure — exist but are scarcer than tropical 6263 / 6265 examples by virtue of the smaller population. Christie’s catalogued one such example, a 1970 6262 with tropical-register dial (lot 6446722, sold via Christie’s online channels). The browning is the same lacquer-instability mechanism documented across the period: the black pigment in the dial lacquer was unstable to light and heat, and decades of wear drove the colour shift. Tropical examples carry significant premium where the case, movement, and pushers are all period-correct.

Sigma transition

The 6262’s final-year production overlaps the start of the Sigma dial era on Daytona references. Sigma dials carry small σ symbols flanking the SWISS line at 6 o’clock, denoting white gold hour markers under the 1970s industry agreement on identifying precious-metal components. The published collector literature marks the start of Sigma on Daytona dials around 1972, which puts the late 6262 production batch in the early-Sigma window. Standard 6263 / 6265 Sigma production runs roughly 1972 through 1978, so a documented Sigma-marked 6262 is a transitional artefact and a thinly populated sub-variant — examples surface only sporadically.

Historical market and auction record

The 6262 sits on the scarcer side of the manual-wind Daytona market because the production run was short. Standard examples trade below the Paul Newman tier but above the broader 6239 field, and the big thematic Daytona auctions helped pull the whole category upward. Auction depth is thinner here than on the 6263 and 6265, so single-lot results matter more.

Sources

Retrieved from "https://bezelbase.org/index.php?title=Reference:6262&oldid=2954"