Reference:3135
The 3135 is a 32mm Perpetual tonneau from the 313x block, the run of reference numbers through which Rolex moved the Bubbleback onto a two-piece case in 1936. Four lots document it, which is thin. One of those four is a multi-tone silvered sector dial dated 1938 that cleared its Phillips estimate several times over, which is not thin at all. That single result is the reference's whole public reputation, and it is a fair one. Sector dials on Bubblebacks are scarce, and this one arrived unpolished with its original hands.
The reference number is not the caliber. Rolex numbers references and movements in separate series, and both series happened to reach 3135 about fifty years apart — the 1988 movement that runs the modern Submariner has nothing to do with this watch, and a search for one will mostly return the other. A second complication is harder to dispose of. One catalogued 3135 describes a manual-wind Oyster instead of a Perpetual, and that conflict is unresolved rather than dismissed.
Core facts
| detail | value |
|---|---|
| reference | 3135 |
| family | Bubbleback (collector name; never official Rolex usage) |
| block | 313x, the 1936 two-piece case generation |
| documented examples | dated 1938 and "1930s" |
| case diameter | 32mm (Phillips gives 33mm) |
| case thickness | 13mm |
| case shape | tonneau |
| case construction | two-body |
| lugs | curved |
| caseback | screw-down, domed |
| crown | screw-down |
| crystal | acrylic |
| movement | 9¾′′′ Perpetual family; no lot names a caliber number |
| jewels | 19 on the one lot that counts them |
| balance | Super Balance, monometallic |
| hairspring | self-compensating Breguet |
| seconds | both centre seconds and subsidiary seconds at 6 documented |
| grade | Chronomètre on at least one example |
| case materials | stainless steel on every documented example |
Where it sits in the line
The 313x numbers are where the Bubbleback stopped being an experiment. The first-generation references, the 1858 and the 3458, used a four-piece case with a separate movement-holder ring. In 1936 Rolex simplified that to two pieces on the 3131 and the 3132, and every working Bubbleback afterwards used the simpler architecture. The 3130 is the 18K yellow gold companion to the 3131; the 3132 is the centre-seconds version running Cal. 630; the 3133, 3134 and 3135 fill out the block.
The 3135's own case is described as two-body with curved lugs, which places it inside that generation rather than alongside the older architecture. That is structural inference from the numbering and one case description, not a sourced production statement — no published source dates this reference, and the two Antiquorum lots say only "1930s".
What separates the 3135 from its immediate neighbours is not construction but the dial that turned up on it. Hodinkee's survey of the family reproduces two sales as the headline Bubbleback results, and the sector-dial 3135 is one of them. For a reference with four documented lots, that is an unusual amount of weight resting on a single watch.
The manual-wind problem
Antiquorum sold a watch in April 2000 catalogued as reference 3135 and titled "Rolex, Oyster, Standard". Its movement is described as 10-ligne, 15 jewels, rhodium-plated with fausses côtes decoration, running a self-compensating flat balance spring. The words self-winding never appear. The dial and case are listed as signed; the movement is not. The case measures 31mm.
That is a manual Oyster specification. A Perpetual of this era runs 9¾ lignes with 17 or 19 jewels and a Breguet overcoil, which is exactly what the other three 3135 lots describe. So either the reference field on that lot is wrong, or Rolex used 3135 for a manual Oyster as well as a Perpetual.
The second reading is harder to dismiss than it looks. The adjacent 3136 is already documented as a manual-wind Oyster that spent years misclassified as a Bubbleback, as are 3059, 3078, 3096, 3116, 3121 and 3140. The 313x block demonstrably contains both kinds of watch, and reference numbers in this period were assigned to cases rather than to movements. A shared case number across two winding types is not an absurd proposition.
What can be said cleanly is that three independent lots across two houses describe a self-winding 3135, and one lot describes something else. This article is about the Perpetual. Anyone offered a 15-jewel manual watch as a Bubbleback 3135 should treat the caseback stamp as the beginning of the question rather than the end of it.
Production outline
There is no documented production window. Antiquorum dates both its Perpetual examples as "1930s" without narrowing further. Phillips dates the sector-dial watch to 1938 and places the sector style generally in the late 1930s to early 1940s across the Swiss industry. The 1936 two-piece transition on the 3131 and 3132 gives a plausible earliest bound for the block.
Beyond that, dating a 3135 means dating the individual watch. Pre-1948 Rolex has no year-letter chart to work from, and on a steel case there are no assay marks either, so a confidently stated production year on an unpapered example is inference presented as fact. Case numbers on the documented set — 115'200 on the Phillips watch, 124X02 on the 2011 Antiquorum lot — are too few to build anything from.
Movement notes
Every documented 3135 runs the 9¾-ligne Perpetual family: rhodium-plated, lever escapement, monometallic Super Balance, self-compensating Breguet hairspring. The 1995 Antiquorum lot counts 19 jewels. Phillips describes the movement as an automatic Super Oyster at 9¾ lignes. The 2011 lot is graded Chronomètre and carries the Super Balance.
No lot names a caliber number, and this article does not supply one. The temptation is obvious. Cal. 620 is the subsidiary-seconds Perpetual of this era and Cal. 630 its centre-sweep counterpart; the 3135 exists in both layouts, so 620 and 630 respectively is the natural reading. It is also unsupported. Nothing in the documented record attributes a caliber to this reference, and the family's caliber attributions have been wrong in print often enough that an inference this tidy should stay labelled as one.
Both seconds layouts are attested. The 1995 lot is a centre-seconds watch with a black radium dial; the 2011 lot has a subsidiary register at 6.
Dial map
Three documented examples carry three different dials, with no pattern to draw from at a reference this thinly recorded.
The multi-tone silvered sector dial on the Phillips watch is the one that matters. Sector dials divide the face into concentric zones with geometric dividers, a design language shared across the better Swiss makers of the late 1930s, and Phillips called this among the rarest dial versions found on Bubblebacks. It came with its original blued steel hands, which on a watch this age is most of the value.
The 2011 Antiquorum lot has an ivory dial with painted baton indexes and Roman numerals, an outer minute track, and a subsidiary seconds register at 6, paired with blued steel baton hands. The 1995 lot has a black dial with radium indexes and Arabic numerals and radium baton hands, with centre seconds.
Case, bezel, crystal, and crown
Two-body construction, polished and brushed, with curved lugs and a screwed-down caseback and crown. Thickness on the 2011 lot is 13mm against a 32mm diameter, which is the Bubbleback profile stated in numbers rather than adjectives — the caseback domes to clear the Perpetual rotor, and that dome is the whole reason the family has its nickname.
Diameter is given as 32mm by Antiquorum on both Perpetual lots and as 33mm by Phillips. The disputed manual lot reads 31mm. The 32mm figure is both the consensus and the standard Bubbleback case size.
Condition is what sets the Phillips example apart. The case is unpolished, the diamond-polished bezel still holds its mirror finish, and the original crystal is crazed. Crazing on a period acrylic crystal is normal and, left alone, is evidence of an untouched watch.
Bracelets and packaging
One fitment is documented, and it works better as an illustration of a general rule than as a fact about the reference. The Phillips 3135, a 1938 watch, came on a stainless steel Rolex rice-grain bracelet — grain de riz, the beads-of-rice pattern collectors prize on Bubblebacks — with a folding deployant clasp stamped 4.51. That stamp reads as the first quarter of 1951. The clasp dates the bracelet, not the watch head, and a thirteen-year gap is wide enough to state the conclusion outright: period-correct rather than original delivery.
The same watch came with a fitted Rolex presentation box. Bubbleback packaging of this era is period-based rather than reference-specific, so the box speaks to when the watch was sold and not to what it was.
Auction record
| date | house and sale | lot | example | estimate | result |
|---|---|---|---|---|---|
| — | Phillips, The Watch Auction ONE | 207 | 1938, case 115'200, multi-tone silvered sector dial, rice-grain bracelet | CHF 25,000–50,000 | CHF 82,500 |
| 2000-04-02 | Antiquorum, Geneva, Hotel Des Bergues | 148 | "Oyster Standard", black radium dial with 24-hour graduation, 31mm — the disputed manual lot | CHF 3,000–3,500 | CHF 3,910 |
| 2011-11-13 | Antiquorum, Geneva | 133 | Chronomètre, case 124X02, ivory Roman dial, subsidiary seconds | CHF 2,500–3,000 | CHF 3,000 |
| 1995-04-22 | Antiquorum, Geneva, Hotel Des Bergues | 300 | centre seconds, black radium dial, 19 jewels | CHF 2,600–2,800 | CHF 2,990 |
The gap between the top line and the rest of the table is the reference in a sentence. Three ordinary steel 3135s have changed hands at major houses for around CHF 3,000 across thirty years. One extraordinary one made twenty-seven times that. Dial and condition carry this reference completely, and a plain 3135 has no premium attached to the number itself.
Christie's, Sotheby's and Bonhams returned nothing for the reference, so the four lots above are the documented market rather than a sample of it.
Sources
- Phillips, "Phillips, The Watch Auction: ONE, Lot 207 — Rolex Ref. 3135 Oyster Perpetual "Bubble Back"", Phillips
- Antiquorum, "Antiquorum Geneva Lot 133 — Rolex Ref. 3135 "Oyster Perpetual" "Chronometre", stainless steel", Antiquorum, 2011-11-13
- Antiquorum, "Antiquorum Geneva, Hotel Des Bergues, Lot 300 — Rolex Oyster Perpetual Ref. 3135, 1930s", Antiquorum, 1995-04-22
- Antiquorum, "Antiquorum Geneva, Hotel Des Bergues, Lot 148 — Rolex, Oyster, "Standard", Ref. 3135, 1930s", Antiquorum, 2000-04-02
- "Buying, Selling, & Collecting: The Rolex Bubbleback And Why It Still Matters", Hodinkee
- Robb Report, "Robb Report — A Collector's Guide to Rolex Bubbleback Watches 1931-1950s", Robb Report, current
- The Vintage Rolex Field Manual — Colin A. White, Morning Tundra
- Everest Bands, "Everest Bands — The Rolex Bubbleback: History and Facts", Everest Bands, current
Related references
- Bubbleback 3131 — first two-piece Oyster case, 1936
- Bubbleback 3132 — Cal. 630 centre-seconds companion, 1936
- Bubbleback 3134 — sweep-seconds sibling in the same block
- Bubbleback 3372 — peak-era production reference
- Bubbleback 3458 — first-generation four-piece case, 1934–1948
- Bubbleback 3599 — the "Rigid Hooded" reference
See also the Bubbleback family index, movement reference, bracelet & clasp guide, and serial numbers by year.