Reference:16618

Submariner -> 16618

The 16618 is the full 18k yellow-gold Submariner Date of the cal. 3135 era. It ran alongside the two-tone 16613 for twenty years and changed the same way the 16613 did, in increments, without a single clean break in the run.

It sits in the middle of the gold Submariner lineage that starts with the first gold Submariner in 1969 and continues to the present: 1680/8 (1969), then the 16808, then the 16618, then the 126618. That makes it the second-longest chapter in the line, and the one covering the gold Submariner at its most technically mature — Microstella regulation, solid end links, sapphire crystal — while still wearing the aluminum bezel insert that ties it to the pre-ceramic era.

Rolex Submariner 16618 — 18k yellow gold with blue dial and bezel

Core facts

detail	value
reference	16618 (LN = black, LB = blue)
family	Submariner Date
production	about 1988 to 2008–2009 (~20 years)
movement	caliber 3135 (date, quick-set, 28800 bph)
case	40mm, full 18k yellow gold
crystal	sapphire with Cyclops
water resistance	300m
bezel	18k gold with aluminum insert (blue or black)
lume	tritium (early), Luminova (~1998), Super-Luminova (late)
bracelet	93158 → 93258 (SEL transition, see bracelet section)
rehaut	plain (early), engraved ROLEX ROLEX (~2005 onward)
successor	116618

Where it sits in the gold Submariner lineage

The gold Submariner is the longest continuous precious-metal thread in the family, and the 16618 is its long modern middle chapter. Three references share the cal. 3135 Submariner Date architecture: the steel 16610, the two-tone Rolesor 16613, and the full-gold 16618. Case dimensions, movement, and crystal are common to all three, and only the metal changes. The 16618 is the top of that range and by a wide margin the heaviest watch in it.

What changed inside the reference arrived in pieces. Lume ran through three generations, the bracelet gained solid end links, the rehaut picked up its engraving, and no single year marks the break. A 1989 16618 and a 2008 16618 are the same reference and noticeably different watches.

Production outline

The 16618 tracks the 16613 change for change, in full gold. Dial lume moves from tritium through Luminova around 1998 to Super-Luminova in the late years. The bracelet moves from the 93158 with hollow end links to the 93258 with solid end links around 2000. The inner rehaut stays plain through the first two thirds of production and picks up the engraved ROLEX ROLEX text with the serial at the 6 o'clock position from around 2005.

Early production (~1988–1998)

Early watches carry tritium lume (marked T SWISS T or T<25) on the 93158 bracelet with hollow end links. The plain rehaut and hollow-link bracelet date these examples firmly to the pre-millennium era. Early tritium examples are the most sought-after configuration in the twenty-year run.

Mid production (~1998–2005)

Dial lume moved from tritium to Luminova and then to Super-Luminova. The bracelet moved to the 93258 with solid end links around 2000. No source pins either changeover to a specific serial band.

Late production (~2005–2009)

The late watches carry the engraved inner rehaut, with ROLEX ROLEX repeating around the ring and the serial at 6 o'clock. In finish and detail these late examples sit closer to the 116618 that replaced them than to the tritium 16618s that opened the run.

Movement notes

Caliber 3135 runs throughout, the same movement used in the steel 16610 and the two-tone 16613. Quick-set date, 28,800 vph, Microstella regulation for fine-tuning. The 3135 is one of the most produced and best-documented calibers in the Rolex catalog, with a reputation for long service intervals and durability.

Case material has no bearing on movement specification. A 16618 and a 16610 from the same year are mechanically identical; only the metal around the movement differs.

Dial map

Champagne Serti dial with diamond hour markers and sapphire indices

Blue dial (LB)

Blue sunburst dial with gold applied markers and gold hands. This is the more commonly photographed and traded configuration of the two. Lume runs from tritium through Luminova to Super-Luminova across the run, on the same schedule as the 16613.

Rolex Forum collectors have documented tropical purple shift on blue 16618 dials. After decades of UV exposure and chemical aging the pigment oxidizes to a purple or plum hue, with forum examples drawn from 1989 and 1991 production. An even, attractive shift is treated as a desirable feature rather than a defect. The tropical shift is better documented on the 16613 because production volumes were higher, but it occurs identically on the 16618.

Black dial (LN)

Black dial with gold applied markers. It surfaces less often in the secondary market and trades at a discount to the blue.

Lapis lazuli dial

A lapis lazuli stone-dial variant of the 16618 is documented on Rolex Forum. A polished slab of lapis lazuli, a deep-blue semi-precious stone with characteristic gold pyrite flecking, replaces the standard painted dial. Rolex made these in-house, they are rare, and they carry substantial premiums. Authentication is exacting: genuine Rolex stone dials have specific finishing and marker-setting characteristics, and an aftermarket stone-dial trade grew up alongside them.

Tiffany & Co. co-signed dials

Rolex Forum documents 16618 dials co-signed "Tiffany & Co." below the coronet and fitted with sapphire and diamond hour markers. These date from the years when Tiffany & Co. was an authorized Rolex dealer and co-signed dials on select references. Surviving examples are rare and the dual-brand provenance drives significant premiums. The co-signature is the thing to authenticate: aftermarket Tiffany-stamped dials exist, and the gap between genuine and fake is wide enough to make faking worthwhile.

Blue dial detail — gold hands and hour markers against sunburst blue

Case, bezel, crystal, and crown

The entire case is 18k yellow gold: body, bezel, crown, crown tube, and case back, with crown guards present and a Triplock crown sealing to 300m. It wears substantially heavier than the steel 16610 of the same generation.

The crystal is sapphire with Cyclops. The bezel insert is aluminum in blue or black, and it fades and scratches with use. That cuts both ways: it is a condition factor at market, and it is what makes an older gold Submariner look worn in instead of untouched. The ceramic insert only arrived with the 116618 that followed.

Early production carries what Rolex Forum collectors call a Flat 3 bezel — a vintage-style font on the insert in which the numeral 3 at the 15-minute position uses a flatter, more angular form. The Flat 3 is an early-production identification point, carried over from the outgoing 16808 generation. Later 16618 bezels moved to the more rounded numerals that became standard across the family.

The inner rehaut is plain on early and mid-production watches. Late examples carry the engraved ROLEX ROLEX text.

Hallmarks follow the standard Rolex precious-metal marking of the period. Helvetia bust with "G" Geneva assay mark through the mid-1990s, then the St. Bernard dog Barry mark from 1995 onward.

Bracelets, end links, clasps, and packaging notes

18k yellow gold Oyster bracelet and Fliplock clasp

Clasp detail with Rolex coronet engraving

Along with lume type, the bracelet is one of the primary authenticity and dating checkpoints on a 16618, running on the same transition schedule as the two-tone 16613.

Early bracelet: 93158

The early bracelet is a full 18k gold Oyster with Fliplock clasp, and it is prone to stretching over time. Gold is softer than steel, and daily wear on a heavy gold case will eventually open play between the links. Stretch is common on well-worn examples and a known condition factor at market. The 93158 covers early production through about 2000.

Sources disagree on 93158 end-link construction. Some describe hollow end links throughout, others solid end links from the start, and nothing published settles it. An end-link claim on any given example is worth checking against the hardware rather than against the bracelet reference number.

Later bracelet: 93258 (solid end links, SEL)

The 93258 brought solid end links — SEL, in collector shorthand — to the full-gold Submariner bracelet. Solid end links close the gap between bracelet and case more tightly than hollow construction, and they remove the flex that hollow-link bracelets tend to develop with age. The transition landed around 2000, mirroring the pattern of the steel and two-tone references. Rolex had first used solid end links on the Sea-Dweller before spreading them across the Submariner family.

The 93158-to-93258 transition is a key authenticity checkpoint. A post-2000 serial 16618 should be on a 93258. A 93158 on a late-serial watch usually points to a bracelet swap or a mismatched example.

Clasp date codes follow the standard Rolex scheme of the period. An S stamp indicates a service replacement. The code dates the bracelet, not the watch head.

Special branches

No military or institutional special branches are documented for the 16618. Beyond the lapis lazuli and the Tiffany-signed dials, no factory gem-set variant of the reference appears in the published literature.

No-holes case (D-serial onward)

Rolex Forum documentation places the no-holes case on the 16618 at around the D serial (roughly 2005–2006), following the same timing as the steel 16610 and two-tone 16613. Earlier examples have drilled lug holes; D-serial and later examples do not. The change is a consistent dating and authenticity checkpoint across the 3135-era Submariner generation.

Historical market and auction record

The 16618 appears at auction less often than the two-tone 16613 and more often than the shorter-run 16808. Full-gold construction puts it at the top of the 3135-era Submariner range by weight and by material value.

Blue LB is the more commonly traded configuration; black LN trades at a discount. Within both dials, the early tritium examples on hollow-link bracelets draw the most attention from collectors who prize the historical specificity of the opening years.

Modern pricing benchmark

The current-generation 126618LB retails at $48,600 USD at Rolex authorized dealers, with a 41mm case, caliber 3235, and ceramic bezel. The aluminum-insert 16618 trades at a significant discount to that, reflecting the older movement, the aluminum bezel, and the smaller case. The modern retail figure is what frames the category the 16618 sits directly beneath.

Related references

• Submariner 16610 — Date, Cal 3135 (1988–2010)
• Submariner 16613 — 1989–2009
• Submariner 16613LB — 1989–2009
• Submariner 16613LN — 1989–2009
• Submariner 14060 — Non-Date, Cal 3000 (1990–2000)
• Submariner 14060M — 2000–2012

See also the Submariner family index, movement reference, bracelet & clasp guide, and serial numbers by year.

Sources

• Tom Mulraney, "History of the Rolex Submariner - Part 2, The 55XX References and 1680 Date", Monochrome, 2020-08-19
• Tom Mulraney, "History of the Rolex Submariner - Part 3, Modern References", Monochrome, 2020
• Stephen Pulvirent, "Reference Points: Understanding The Rolex Submariner", Hodinkee, 2019-07-18
• Stephen Pulvirent, "The Rolex Submariner: A Complete Collector's Guide", Sotheby's, 2025-03-07
• The Vintage Rolex Field Manual — Colin A. White, Morning Tundra
• Oyster Perpetual Submariner: The Watch that Unlocked the Deep — Nicholas Foulkes, Wallpaper / ACC Art Books, 2024-09-16
• Rich Fordon, "Five Things I Learned From The First Ever Rolex-Authorized Submariner Book", Hodinkee, 2024-09-25
• Collecting Rolex Submariner — Franca and Guido Mondani, Guido Mondani Editore
• RolexForums community, "RolexForums vintage Submariner research bundle", RolexForums, 2026-04-13
• "Bob's Watches two-tone Submariner history", Bob's Watches
• "Gray & Sons Submariner Date history", Gray & Sons
• "Rolex Submariner Reference Guide", Professional Watches
• Robert-Jan Broer, "The New Rolex Submariner Date In Gold Reference 126618LB", Fratello Watches, 2020-11-20